ZOOM Modem Software Upgrades and Configuration
Only MS IE 6 is supported by Zoom for upgrades. Your computer
should be directly attached to the Zoom device. To access a modem in bridge mode
you must manually set your computer's LAN IP address to 10.0.0.10.
The default URL/IP address to access the Zoom router is http://10.0.0.2/
The default username is admin and the password is zoomadsl
X6 (Model 5590) Software Upgrade and configuration.
After a firmware upgrade from 1.0.6 to 2.0.4 you will need to
power cycle your X6 modem and then press reset button before
you will be able to restore a working configuration.
2.0.4 Firmware for Zoom X6 5590 only (windows)
2.0.4 Firmware for Zoom X6 5590 only (macintosh)
NETPLEX ADSL base config file for X6 router with 2.0.4 firmware (right click and then Save Target As...)
note: you must set your WEP key after restoring the config file!
X5 (Model 5654) Software Upgrade and configuration.
2.1.0 Firmware for Zoom X5 5654 only (windows)
2.1.0 Firmware for Zoom X5 5654 only (macintosh)
NETPLEX ADSL base config file for X5 router with
2.1.0 firmware (right click and then Save Target As...)
X3 (Model 5660) Software Upgrade and configuration.
2.1.0 Firmware for Zoom X3 5660 only (windows)
2.1.0 Firmware for Zoom X3 5660 only (macintosh)
NETPLEX ADSL base config file for X3 bridge mode with 2.1.0 firmware (right click and then Save Target As...)
NETPLEX ADSL base config file for X3 router mode with 2.1.0 firmware (right click and then Save Target As...)
For manuals and additional information please check the Zoom ADSL Technical Support page.